Alex Zhang

No. 1 edge: has a precise profile (round or square), suitable for edge conditions that require very precise width or plating. This edge is often used in applications that require high precision, such as electronic components, medical devices, etc. No. 2 edge: the natural edge formed by cold rolling of hot-rolled strip steel, without additional

Inconel 625 is a high-performance alloy of nickel-chromium-molybdenum noted for its high strength rating, resistance to temperature and resistance to corrosion. This superalloy consists primarily of nickel, followed by chromium, molybdenum, niobium, iron, tantalum, cobalt, and trace quantities of manganese, silicon, aluminium, and titanium (58% min.). What are the applications of Inconel 625? Marine applications

The Incoloy 800 is a nickel-iron-chromium alloy that exhibits various characteristics and demonstrates its use in a wide variety of applications. This alloy is able to hold the austenitic structure in place. This nickel steel alloy has a high carbon level of 800 H and consists of 1.20 percent aluminium as well as added titanium.

What is Cast Iron Pipe? The irreplaceable nature of cast iron pipes Cast iron pipes are commonly used materials in the field of industrial pipelines. Their high strength, corrosion resistance, and long service life make them widely used in water supply, drainage, energy transmission, etc. According to relevant statistics, more than 30% of the world’s

The Incoloy 800 is an alloy based on nickel, iron & chromium. The Incoloy 800 bars are known not only for their strong strength, but also for their excellent oxidation and carburization resistance when exposed to elevated temperatures. There are two additional alloys that can be extracted from the Incoloy 800. And the incorporation of

The chromium-nickel alloy Inconel 600 is designed for use at temperatures below 2000 ° F and lower levels of cryogenicity. Due to the material resistant to chromium nickel and weak oxidation conditions, the alloy is resistant to the falling environment as well as chloride to stress corrosion cracking. With a high nickel content, the Inconel

Outer Diameter Definition of Outer Diameter The outer diameter refers to the largest diameter on the outside of the pipe. The common symbol is Φ, which can also be abbreviated as OD. The common default unit is mm. The outer diameter is one of the most important parameters of the pipe. According to international standards

Principles of the Design Phase Principles to be followed mechanical stability principle, material adaptation principle, environmental adaptation principle ‌Load analysis‌: Calculate permanent load (self-weight), variable load (fluid pressure, wind load) and accidental load (earthquake). ‌Material selection‌: carbon steel, stainless steel or composite material (material selection should be based on environmental corrosiveness and temperature) ‌Software assistance‌:

Sheets are found in different metals like Stainless Steel, Brass, Aluminium, Copper, Nickel, Titanium, Carbon steel etc. A sheet is thinner item that is been cut from a continuous big rolled coil, and are less than 1mm or upto 25mm thick. Whereas a plate is a bit thicker item of a metal and is be

Nternational standard system and size parameters Stainless steel sizes are usually determined by outer diameter and wall thickness. ‌ASME B36.19‌ standard ‌23 is the size standard for stainless steel pipes. This standard specifies the standardized parameters for welded (seamless) steel pipes under high temperature, high pressure and low temperature environments. There are the following core