Monel is an alloy based on nickel 65-70 percent and copper 20-29 percent and also contains iron and manganese up to 5 percent and other compounds. Monel can be divided into various grades such as Monel 400, K500, R-405 depending on the proportion of various elements. In this article, we are going to discuss the

Inconel 625 is a nickel-chromium alloy is employed for its high strength, outstanding fabricability and excellent resistance to corrosion. Service temperatures range from cryogenic to 1800 degrees F (982 degrees C). Inconel 625 is resistant to corrosion and is used both for its high strength and outstanding resistance to aqueous corrosion. Due to the addition

Definition and explanation of SCH 80 pipe SCH 80 pipe is a type of pipe manufactured according to the standards of the American National Standards Institute (ANSI) and the American Petroleum Institute (API). The name SCH 80 comes from the ratio of the wall thickness and diameter of the pipe, which indicates the strength and

Incoloy 800 Bars are nickel-iron-chromium alloys with good strength and outstanding resistance to oxidation and carburization in high-temperature exposure. Due to its nickel content Incoloy 800 Bars highly are resistant to both chloride stress-corrosion cracking and to embrittlement from precipitation of sigma phase. The general corrosion resistance is outstanding. Incoloy 800 is mainly used in

No. 1 edge: has a precise profile (round or square), suitable for edge conditions that require very precise width or plating. This edge is often used in applications that require high precision, such as electronic components, medical devices, etc. No. 2 edge: the natural edge formed by cold rolling of hot-rolled strip steel, without additional

Inconel 625 is a high-performance alloy of nickel-chromium-molybdenum noted for its high strength rating, resistance to temperature and resistance to corrosion. This superalloy consists primarily of nickel, followed by chromium, molybdenum, niobium, iron, tantalum, cobalt, and trace quantities of manganese, silicon, aluminium, and titanium (58% min.). What are the applications of Inconel 625? Marine applications

Pipe fittings are parts used to connect, control, regulate and guide the fluid in the pipeline. They are usually used in conjunction with pipelines to change the flow direction, distribute the flow, adjust the size or close the pipeline system. Pipe fittings are widely used in industry, civil and various fluid transmission systems. Basic knowledge

The Incoloy 800 is a nickel-iron-chromium alloy that exhibits various characteristics and demonstrates its use in a wide variety of applications. This alloy is able to hold the austenitic structure in place. This nickel steel alloy has a high carbon level of 800 H and consists of 1.20 percent aluminium as well as added titanium.

What is Cast Iron Pipe? The irreplaceable nature of cast iron pipes Cast iron pipes are commonly used materials in the field of industrial pipelines. Their high strength, corrosion resistance, and long service life make them widely used in water supply, drainage, energy transmission, etc. According to relevant statistics, more than 30% of the world’s

The Incoloy 800 is an alloy based on nickel, iron & chromium. The Incoloy 800 bars are known not only for their strong strength, but also for their excellent oxidation and carburization resistance when exposed to elevated temperatures. There are two additional alloys that can be extracted from the Incoloy 800. And the incorporation of