Slip-on Raised Face Flanges are one of the most commonly used flange types in various industrial applications. Slip-on face flanges involve welding a hub to the pipe and bolting it with ring gaskets between them.
It is highly preferred due to its low cost, fast installation, and easy maintenance. You must understand the process to ensure proper Slip on Raised Face Flange installation. The most important part of the Slip on Raised Face Flange is its sealing capability which relies heavily on an even sealing surface at the connection point of two characters.
Applications of Slip-On Raised Face Flanges
To achieve this, a few simple steps must be taken during preparing, assembly, and tightening of Slip on Raised Face Flanges. Preparing Slip On Raised Face Flanges for installation includes:
- Cleaning the surface to be sealed.
- Checking for any defects in the flange and pipe.
- Verifying that the bolt holes are appropriately aligned and of equal size.
- Ensuring that gaskets fit correctly and don’t have any burrs or sharp edges.
- Applying lubricant on the bolts.
Once prepared, Slip on Raised Face Flanges can be assembled by bolting them together with a ring gasket between them. It is essential to ensure that all gaskets are flat when installed and that proper torque is applied during tightening to prevent leakage at this connection point.
Features of Slip-On Raised Face Flanges
After the Slip on Raised Face Flanges is appropriately tightened, a final inspection is recommended to verify that the seal is satisfactory and that there are no leaks. Slip-on face flanges should be properly maintained over time to ensure optimal performance and avoid any potential contamination caused by leakage.
Raised Face Flanges can provide a reliable and durable connection for industrial applications with proper installation and maintenance. Understanding how Slip on Raised Face Flanges work will help you make sure your links are secure and leak-free.
